|
|
|
National Stock Number:
4330-01-317-8278
Federal Supply Class:
4330
National Item Identification Number:
013178278
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 127392 | 60764 | WIGGINS LIFT CO INC | | P50-2-100-RV3 | 55524 | FLOW EZY FILTERS INC |
|
Techincal Specification:
| STYLE DESIGNATOR | SUMP TYPE | | BODY DIAMETER | 4.188 INCHES NOMINAL | | BODY OVERALL LENGTH | 9.125 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | NPT | | NOMINAL THREAD SIZE | 2.000 INCHES | | MATERIAL | STEEL CORROSION RESISTING FILTERING MEDIUM | | FILTERING MEDIA DESIGN | MESH SINGLE FILTERING MEDIA RESPONSE | | MESH SIZE | 100.0 | | WIRE DIAMETER | 0.005 INCHES NOMINAL | | DESIGN TYPE | LIMITED | | FLOW DIRECTION | OUTSIDE IN | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | DROP PRESSURE | 0.2 POUNDS PER SQUARE INCH | | FILTERING SURFACE AREA | 2.4 SQUARE FEET | | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW | | FEATURES PROVIDED | BY-PASS VALVE | | SPECIAL FEATURES | NYLON END;HEX FACILITY;75 GPM;FILTRATION RATING 149.0 MICRONS,ABSOLUTE |
|
|