| END CONNECTION DESIGN | STRAIGHT FIRST END |
| END CONNECTION DESIGN | STRAIGHT SECOND END |
| BURST TEST PRESSURE | 2500.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED EXTERNAL PIPE SECOND END |
| CONNECTION TYPE | THREADED INTERNAL TUBE FIRST END |
| CONNECTION STYLE | INVERTED FLARE SECOND END |
| CONNECTION STYLE | SWIVEL NUT FLARE FIRST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| HYDROSTATIC TEST PRESSURE | 1250.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 1.125 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| ITEM STRUCTURAL COMPOSITION | RUBBER IMPREGNATED BRAIDED COTTON CORD FIRST LAYER |
| ITEM STRUCTURAL COMPOSITION | RUBBER IMPREGNATED BRAIDED COTTON CORD OUTER LAYER |
| ITEM STRUCTURAL COMPOSITION | RUBBER IMPREGNATED BRAIDED STEEL WIRE SECOND LAYER |
| OPERATING PRESSURE | 625.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED |
| OUTER COVERING ENVIRONMENTAL PROTECTION | MILDEW RESISTANT AND OIL RESISTANT |
| OUTSIDE DIAMETER | 1.500 INCHES NOMINAL |
| MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID, WATER BASE AND FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MEASURING METHOD AND LENGTH | 61.500 INCHES NOMINAL OVERALL |
| MINIMUM INSIDE BENDING RADIUS | 9.000 INCHES |
| NOMINAL THREAD SIZE | 1.250 INCHES SECOND END |
| NOMINAL THREAD SIZE | 1.625 INCHES FIRST END |
| SEAT ANGLE | 30.0 DEGREES FIRST END |
| SEAT ANGLE | 30.0 DEGREES SECOND END |
| SPECIAL FEATURES | HOSE MEETS REQUIREMENTS OF SAE J1402,TYPE D,CLASS 1 |
| VACUUM IN TORR | 254.0 |
| TEMP RATING | -40.0 CELSIUS AND 93.0 CELSIUS SINGLE RESPONSE |
| THREAD CLASS | 2B FIRST END |
| THREAD DIRECTION | RIGHT-HAND FIRST END |
| THREAD DIRECTION | RIGHT-HAND SECOND END |
| THREAD QUANTITY PER INCH | 14 FIRST END |
| THREAD SERIES DESIGNATOR | NPT SECOND END |
| THREAD SERIES DESIGNATOR | UNS FIRST END |