| END CONNECTION DESIGN | STRAIGHT FIRST END |
| END CONNECTION DESIGN | ELBOW SECOND END |
| BURST TEST PRESSURE | 12000.0 POUNDS PER SQUARE INCH |
| CONNECTION STYLE | SWIVEL NUT FLARE SECOND END |
| CONNECTION STYLE | SWIVEL NUT FLARE FIRST END |
| CONNECTION TYPE | THREADED INTERNAL TUBE FIRST END |
| CONNECTION TYPE | THREADED INTERNAL TUBE SECOND END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| EXTERIOR COLOR | BLACK |
| FLOW ANGLE | 90.0 DEGREES SECOND END |
| HYDROSTATIC TEST PRESSURE | 6000.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.188 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND 1ST LAYER BRAIDED COTTON CORD AND OUTER LAYER RUBBER IMPREGNATED BRAIDED COTTON CORD |
| OUTER COVERING ENVIRONMENTAL PROTECTION | HYDRAULIC SOLUTION RESISTANT AND MILDEW RESISTANT AND OIL RESISTANT |
| OUTSIDE DIAMETER | 0.516 INCHES NOMINAL |
| MEASURING METHOD AND LENGTH | 12.000 INCHES NOMINAL WORKING |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 3.000 INCHES |
| NOMINAL THREAD SIZE | 0.438 INCHES FIRST END |
| NOMINAL THREAD SIZE | 0.438 INCHES SECOND END |
| OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED |
| SEAT ANGLE | 37.0 DEGREES SECOND END |
| SEAT ANGLE | 37.0 DEGREES FIRST END |
| VACUUM IN TORR | 50.8 |
| TEMP RATING | -65.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE |
| TEST DATA DOCUMENT | 70898-35-580010 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| THREAD CLASS | 3B FIRST END |
| THREAD CLASS | 3B SECOND END |
| THREAD DIRECTION | RIGHT-HAND FIRST END |
| THREAD DIRECTION | RIGHT-HAND SECOND END |
| THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) FIRST END |
| THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) SECOND END |