| END CONNECTION DESIGN | ELBOW FIRST END |
| END CONNECTION DESIGN | ELBOW SECOND END |
| END FLANGE CONSTRUCTION | SOLID FIRST END |
| END FLANGE CONSTRUCTION | SOLID SECOND END |
| BOLT CIRCLE DIAMETER | 1.855 INCHES NOMINAL SECOND END |
| BOLT CIRCLE DIAMETER | 2.562 INCHES NOMINAL FIRST END |
| BOLT HOLE DIAMETER | 0.266 INCHES NOMINAL FIRST END |
| BOLT HOLE DIAMETER | 0.281 INCHES NOMINAL SECOND END |
| BOLT HOLE QUANTITY | 4 FIRST END |
| BOLT HOLE QUANTITY | 4 SECOND END |
| BURST TEST PRESSURE | 2500.0 POUNDS PER SQUARE INCH |
| CONNECTION STYLE | PLAIN FIRST END |
| CONNECTION STYLE | PLAIN SECOND END |
| CONNECTION TYPE | PLAIN FACE FLANGE FIRST END |
| CONNECTION TYPE | PLAIN FACE FLANGE SECOND END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FLANGE STYLE | ROUND W / BOLT HOLES FIRST END |
| FLANGE STYLE | ROUND W / BOLT HOLES SECOND END |
| FLOW ANGLE | 67.5 DEGREES FIRST END |
| FLOW ANGLE | 90.0 DEGREES SECOND END |
| HYDROSTATIC TEST PRESSURE | 1250.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.875 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| OUTSIDE DIAMETER | 1.141 INCHES NOMINAL |
| MEASURING METHOD AND LENGTH | 19.625 INCHES NOMINAL WORKING |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| OPERATING PRESSURE | 1000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED |
| TEMP RATING | -40.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE |