| END CONNECTION DESIGN | ELBOW SECOND END |
| END CONNECTION DESIGN | STRAIGHT FIRST END |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| END FLANGE CONSTRUCTION | SOLID SECOND END |
| BURST TEST PRESSURE | 10000.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | PLAIN FACE FLANGE SECOND END |
| CONNECTION TYPE | THREADED INTERNAL TUBE FIRST END |
| CONNECTION STYLE | PLAIN SECOND END |
| CONNECTION STYLE | SWIVEL NUT FLARE FIRST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FEATURES PROVIDED | REUSABLE END FITTINGS |
| FITTING COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING ZINC FIRST END |
| FLANGE OUTSIDE DIAMETER | 2.375 INCHES NOMINAL SECOND END |
| FLANGE STYLE | ROUND W/ OUT BOLT HOLES SECOND END |
| FLANGE THICKNESS | 0.315 INCHES NOMINAL SECOND END |
| FLOW ANGLE | 45.0 DEGREES SECOND END |
| HYDROSTATIC TEST PRESSURE | 5000.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 1.500 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| ITEM STRUCTURAL COMPOSITION | MOLDED RUBBER, SYNTHETIC OUTER LAYER |
| ITEM STRUCTURAL COMPOSITION | SPIRALLY LAID STEEL WIRE THIRD LAYER |
| ITEM STRUCTURAL COMPOSITION | SPIRALLY LAID STEEL WIRE FIRST LAYER |
| ITEM STRUCTURAL COMPOSITION | SPIRALLY LAID STEEL WIRE FOURTH LAYER |
| ITEM STRUCTURAL COMPOSITION | SPIRALLY LAID STEEL WIRE SECOND LAYER |
| OPERATING PRESSURE | 2500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED |
| OUTSIDE DIAMETER | 2.080 INCHES NOMINAL |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MEASURING METHOD AND LENGTH | 59.000 INCHES NOMINAL OVERALL |
| MINIMUM INSIDE BENDING RADIUS | 20.000 INCHES |
| NOMINAL THREAD SIZE | 1.875 INCHES FIRST END |
| SEAT ANGLE | 37.0 DEGREES FIRST END |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| TEMP RATING | -40.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 2B FIRST END |
| THREAD DIRECTION | RIGHT-HAND FIRST END |
| THREAD SERIES DESIGNATOR | UNF FIRST END |