| END CONNECTION DESIGN | ELBOW FIRST END |
| END FLANGE CONSTRUCTION | SOLID FIRST END |
| ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 150.0 |
| BOLT HOLE DIAMETER | 0.469 INCHES NOMINAL FIRST END |
| BOLT HOLE QUANTITY | 4 FIRST END |
| BURST TEST PRESSURE | 20000.0 POUNDS PER SQUARE INCH |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.094 INCHES NOMINAL FIRST END |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.250 INCHES NOMINAL FIRST END |
| CONNECTION STYLE | PLAIN FIRST END |
| CONNECTION TYPE | PLAIN FACE FLANGE FIRST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FLANGE LENGTH | 3.190 INCHES NOMINAL FIRST END |
| FLANGE THICKNESS | 0.375 INCHES NOMINAL FIRST END |
| FLANGE STYLE | DOUBLE OVAL (SAE SPLIT TYPE FLANGE) FIRST END |
| FLANGE WIDTH | 2.660 INCHES NOMINAL FIRST END |
| FLOW ANGLE | 90.0 DEGREES FIRST END |
| INSIDE DIAMETER | 1.000 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC AND 2ND LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC AND 3RD LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC AND 4TH LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC AND OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| OUTSIDE DIAMETER | 1.510 INCHES NOMINAL |
| MEASURING METHOD AND LENGTH | 42.000 INCHES NOMINAL OVERALL |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 14.000 INCHES |
| OPERATING PRESSURE | 5000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED |
| TEMP RATING | -40.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE |