| END CONNECTION DESIGN | ELBOW SECOND END |
| END CONNECTION DESIGN | STRAIGHT FIRST END |
| BURST TEST PRESSURE | 11000.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED INTERNAL HOSE FIRST END |
| CONNECTION TYPE | THREADED INTERNAL HOSE SECOND END |
| CONNECTION STYLE | SWIVEL NUT, GASKET SEAL FIRST END |
| CONNECTION STYLE | SWIVEL NUT, GASKET SEAL SECOND END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| EXTERIOR COLOR | BLACK |
| FLOW ANGLE | 45.0 DEGREES SECOND END |
| HYDROSTATIC TEST PRESSURE | 5500.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.242 INCHES MINIMUM AND 0.273 INCHES MAXIMUM |
| INSIDE SURFACE CONDITION | SMOOTH |
| ITEM STRUCTURAL COMPOSITION | BRAIDED CORROSION RESISTANT STEEL WIRE FIRST LAYER |
| ITEM STRUCTURAL COMPOSITION | MOLDED RUBBER, SYNTHETIC OUTER LAYER |
| OPERATING PRESSURE | 2750.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED |
| OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND OIL RESISTANT AND WATERPROOF |
| OUTSIDE DIAMETER | 0.557 INCHES MAXIMUM |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MEASURING METHOD AND LENGTH | 920.0 MILLIMETERS NOMINAL WORKING |
| MINIMUM INSIDE BENDING RADIUS | 4.000 INCHES |
| NOMINAL THREAD SIZE | 0.562 INCHES FIRST END |
| NOMINAL THREAD SIZE | 0.688 INCHES SECOND END |
| TEMP RATING | -40.0 FAHRENHEIT AND 212.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 3B FIRST END |
| THREAD CLASS | 3B SECOND END |
| THREAD DIRECTION | RIGHT-HAND FIRST END |
| THREAD DIRECTION | RIGHT-HAND SECOND END |
| THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) FIRST END |
| THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) SECOND END |