| END CONNECTION DESIGN | ELBOW SECOND END |
| END CONNECTION DESIGN | STRAIGHT FIRST END |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| BURST TEST PRESSURE | 3500.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED INTERNAL TUBE SECOND END |
| CONNECTION TYPE | THREADED INTERNAL TUBE FIRST END |
| CONNECTION STYLE | SWIVEL NUT FLARE FIRST END |
| CONNECTION STYLE | SWIVEL NUT FLARE SECOND END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FITTING COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING ZINC FIRST END |
| FLOW ANGLE | 90.0 DEGREES SECOND END |
| HYDROSTATIC TEST PRESSURE | 1750.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.500 INCHES MINIMUM AND 0.539 INCHES MAXIMUM |
| INSIDE SURFACE CONDITION | SMOOTH |
| ITEM STRUCTURAL COMPOSITION | BRAIDED STEEL WIRE THIRD LAYER |
| ITEM STRUCTURAL COMPOSITION | MOLDED RUBBER, SYNTHETIC FIRST LAYER |
| ITEM STRUCTURAL COMPOSITION | RUBBER IMPREGNATED BRAIDED FABRIC OUTER LAYER |
| ITEM STRUCTURAL COMPOSITION | RUBBER IMPREGNATED BRAIDED FABRIC SECOND LAYER |
| OPERATING PRESSURE | 875.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED |
| OUTER COVERING ENVIRONMENTAL PROTECTION | OZONE RESISTANT AND OIL RESISTANT AND FUEL RESISTANT AND MILDEW RESISTANT |
| OUTSIDE DIAMETER | 0.808 INCHES MINIMUM AND 0.854 INCHES MAXIMUM |
| MEASURING METHOD AND LENGTH | 39.500 INCHES MINIMUM OVERALL AND 40.500 INCHES MAXIMUM OVERALL |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 2.250 INCHES |
| NOMINAL THREAD SIZE | 0.750 INCHES FIRST END |
| NOMINAL THREAD SIZE | 0.750 INCHES SECOND END |
| NONDEFINITIVE SPEC/STD DATA | 3 TYPE AND 4 TABLE |
| SEAT ANGLE | 37.0 DEGREES FIRST END |
| SEAT ANGLE | 37.0 DEGREES SECOND END |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| SPECIFICATION/STANDARD DATA | 81349-MIL-H-13444E GOVERNMENT SPECIFICATION |
| TEMP RATING | -55.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 2B FIRST END |
| THREAD CLASS | 2B SECOND END |
| THREAD DIRECTION | RIGHT-HAND FIRST END |
| THREAD DIRECTION | RIGHT-HAND SECOND END |
| THREAD QUANTITY PER INCH | 16 FIRST END |
| THREAD QUANTITY PER INCH | 16 SECOND END |
| THREAD SERIES DESIGNATOR | UNF FIRST END |
| THREAD SERIES DESIGNATOR | UNF SECOND END |