|
|
|
National Stock Number:
4730-00-250-1025
Federal Supply Class:
4730
National Item Identification Number:
002501025
Description:
BOLT,FLUID PASSAGE
Detail:
A boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
|
Manufacturer Information:
| 11644425 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| DISTANCE FROM FIRST RADIAL HOLE CENTER TO END OF BOLT | 0.350 INCHES NOMINAL | | BODY STYLE | PLAIN | | CONCENTRIC HOLE DEPTH | 0.400 INCHES NOMINAL | | CONCENTRIC HOLE DIAMETER | 0.125 INCHES NOMINAL | | FIRST END CONNECTION TYPE | THREADED EXTERNAL TUBE | | FIRST DIAMETER FROM WRENCHING FEATURE | 0.375 INCHES NOMINAL | | FIRST END NOMINAL THREAD SIZE | 0.375 INCHES | | FIRST END STYLE DESIGNATOR | PLAIN | | FIRST END THREAD DIRECTION | RIGHT-HAND | | FIRST END THREAD CLASS | 3A | | FIRST END THREAD LENGTH | 0.447 INCHES NOMINAL | | FIRST END THREAD QUANTITY PER INCH | 24 | | FIRST END THREAD SERIES DESIGNATOR | UNF | | FIRST RADIAL FLUID HOLE DIAMETER | 0.062 INCHES NOMINAL | | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO BOLT END | 0.550 INCHES NOMINAL | | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FIRST DIAMETER | 0.063 INCHES MINIMUM AND 0.078 INCHES MAXIMUM | | OVERALL LENGTH | 0.750 INCHES NOMINAL | | MATERIAL | STEEL | | WIDTH ACROSS FLATS | 0.620 INCHES NOMINAL | | WRENCHING FEATURE HEIGHT | 0.200 INCHES NOMINAL | | WRENCHING FEATURE STYLE | HEXAGON | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | CADMIUM |
|
|