|
|
|
National Stock Number:
4730-01-086-8926
Federal Supply Class:
4730
National Item Identification Number:
010868926
Description:
SLEEVE,CLINCH,TUBE FITTING
Detail:
A FLANGED CYLINDRICAL ITEM HAVING A SHARP CUTTING SURFACE ON THE INSIDE DIAMETER AT THE END OPPOSITE THE FLANGE. THE CUTTING EDGE, IN USE, IS DESIGNED TO IMBED IN THE TUBING DUE TO PRESSURE EXERTED WHEN THE OUTSIDE DIAMETER OF THE SLEEVE IS FORCED INTO AND AGAINST AN ANGULAR SEAT. THIS FIRMLY ATTACHES THE SLEEVE TO THE TUBING AND THE FLANGED END THEN SERVES AS A BEARING SURFACE FOR THE COUPLING NUT TO BRING THE TUBING INTO THE MATING FITTING.
|
Manufacturer Information:
| 156 ITEM 10 | K7018 | WELLMAN GROUP | | 156/10 | K7018 | WELLMAN GROUP | | MS21922-10C | 0U583 | SAE INTERNATIONAL | | MS21922-10R | 56607 | LEXAIR INC | | MS21922-10C | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | MS21922-10C | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | SAE-AS18280 | 0U583 | SAE INTERNATIONAL | | MS21922-10R | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | X5008/12/156 ITEM 10 | K7018 | WELLMAN GROUP | | X5008/12/156/10 | K7018 | WELLMAN GROUP |
|
Techincal Specification:
| CASEHARDENING INDICATOR | NOT CASEHARDENED | | FLANGE OUTSIDE DIAMETER | 0.750 INCHES NOMINAL | | FLANGE WIDTH | 0.090 INCHES MINIMUM AND 0.095 INCHES MAXIMUM | | HOSE/TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED | 0.625 INCHES NOMINAL | | MATERIAL | STEEL COMP 630 | | OVERALL LENGTH | 0.790 INCHES MINIMUM AND 0.810 INCHES MAXIMUM | | SEAT ANGLE IN DEG | 12.0 | | SLEEVE OUTSIDE DIAMETER | 0.707 INCHES NOMINAL | | STYLE DESIGNATOR | FLARELESS |
|