|
|
|
National Stock Number:
4810-00-688-7866
Federal Supply Class:
4810
National Item Identification Number:
006887866
Description:
VALVE,SOLENOID
Detail:
A valve having two or more ports with valve stem or pilot needle in a normally open or closed position. It is specifically designed to stop or start or change the flow of fluid by means of the magnetic action of an electric coil on a moveable core or plunger. The valve may be equipped with a manual opening or closing device. For items with three or more ports that utilize a reciprocating slide with recess areas which mate with ports in an integral or replaceable ported sleeve, see VALVE (1), LINEAR, DIRECTIONAL CONTROL. It may be inline or cartridge (manifold) design. Excludes VALVE (1), BUTTERFLY.
|
Manufacturer Information:
| 37898-0 | 55820 | RTX CORPORATION | | 550310 | 53730 | WESTFIELD HYDRAULICS INC | | V27200-527 | 96487 | VALCOR ENGINEERING CORPORATION |
|
Techincal Specification:
| APERTURE DIAMETER | 0.050 INCHES NOMINAL | | CONNECTION STYLE | FLARED (TUBE) SECOND END | | CONNECTION TYPE | THREADED EXTERNAL TUBE FIRST END | | CONNECTION TYPE | THREADED EXTERNAL TUBE SECOND END | | FLOW CONTROL DEVICE NORMAL OPERATION POSITION | CLOSED | | FLOW CONTROL DEVICE | DISK | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | MAXIMUM OPERATING TEMP | 130.0 FAHRENHEIT SINGLE RESPONSE | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE | | MOUNTING POSITION | HORIZONTAL OR VERTICAL | | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.125 INCHES SECOND END | | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.250 INCHES FIRST END | | NOMINAL THREAD SIZE | 0.437 INCHES FIRST END | | NOMINAL THREAD SIZE | 0.312 INCHES SECOND END | | OPERATING PRESSURE | 350.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE | | SEAT ANGLE | 37.0 DEGREES SECOND END | | SEAT ANGLE | 37.0 DEGREES FIRST END | | VALVE OPERATION METHOD | SOLENOID | | VOLTAGE IN VOLTS AND CURRENT TYPE | 24.0 DC | | STYLE DESIGNATOR | STRAIGHT THRU | | THREAD CLASS | 3A FIRST END | | THREAD CLASS | 3A SECOND END | | THREAD DIRECTION | RIGHT-HAND FIRST END | | THREAD DIRECTION | RIGHT-HAND SECOND END | | THREAD QUANTITY PER INCH | 24 SECOND END | | THREAD SERIES DESIGNATOR | UNF FIRST END | | THREAD SERIES DESIGNATOR | UNF SECOND END |
|
|