|
|
|
National Stock Number:
4810-00-891-4461
Federal Supply Class:
4810
National Item Identification Number:
008914461
Description:
VALVE,SOLENOID
Detail:
A valve having two or more ports with valve stem or pilot needle in a normally open or closed position. It is specifically designed to stop or start or change the flow of fluid by means of the magnetic action of an electric coil on a moveable core or plunger. The valve may be equipped with a manual opening or closing device. For items with three or more ports that utilize a reciprocating slide with recess areas which mate with ports in an integral or replaceable ported sleeve, see VALVE (1), LINEAR, DIRECTIONAL CONTROL. It may be inline or cartridge (manifold) design. Excludes VALVE (1), BUTTERFLY.
|
Manufacturer Information:
| 10214892 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND |
|
Techincal Specification:
| APERTURE DIAMETER | 0.120 INCHES NOMINAL | | CONNECTION STYLE | FLARE(TUBE) ALL ENDS | | CONNECTION TYPE | THREADED INTERNAL TUBE ALL ENDS | | CURRENT RATING IN AMPS | 1.000 | | FLOW CONTROL DEVICE NORMAL OPERATION POSITION | CLOSED | | FLOW CONTROL DEVICE | DISK | | MATERIAL | PLASTIC POLYCHLOROTRIFLUOROETHYLENE SEAT | | MATERIAL | STEEL CORROSION RESISTING BODY | | MAXIMUM OPERATING TEMP | 125.0 FAHRENHEIT SINGLE RESPONSE | | MEDIA FOR WHICH DESIGNED | AIR FIRST RESPONSE | | MEDIA FOR WHICH DESIGNED | NITROGEN, LIQUID SECOND RESPONSE | | MOUNTING POSITION | HORIZONTAL OR VERTICAL | | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.250 INCHES ALL ENDS | | NOMINAL THREAD SIZE | 0.437 INCHES ALL ENDS | | SEAT ANGLE | 60.0 DEGREES ALL ENDS | | VALVE OPERATION METHOD | SOLENOID | | VOLTAGE IN VOLTS AND CURRENT TYPE | 18.0 DC AND 30.0 DC | | STYLE DESIGNATOR | STRAIGHT THRU | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-STD-171,FINISH5.4.1 MIL STD SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | PASSIVATE | | TEST DATA DOCUMENT | 18876-10214892 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | THREAD CLASS | 3B ALL ENDS | | THREAD DIRECTION | RIGHT-HAND ALL ENDS | | THREAD QUANTITY PER INCH | 20 ALL ENDS | | THREAD SERIES DESIGNATOR | UNF ALL ENDS |
|
|