|
|
|
National Stock Number:
4810-01-041-4856
Federal Supply Class:
4810
National Item Identification Number:
010414856
Description:
VALVE,SOLENOID
Detail:
A valve having two or more ports with valve stem or pilot needle in a normally open or closed position. It is specifically designed to stop or start or change the flow of fluid by means of the magnetic action of an electric coil on a moveable core or plunger. The valve may be equipped with a manual opening or closing device. For items with three or more ports that utilize a reciprocating slide with recess areas which mate with ports in an integral or replaceable ported sleeve, see VALVE (1), LINEAR, DIRECTIONAL CONTROL. It may be inline or cartridge (manifold) design. Excludes VALVE (1), BUTTERFLY.
|
Manufacturer Information:
| V27200-554 | 96487 | VALCOR ENGINEERING CORPORATION |
|
Techincal Specification:
| MATERIAL | STEEL CORROSION RESISTING OVERALL | | STYLE DESIGNATOR | STRAIGHT THRU | | FLOW CONTROL DEVICE | DISK | | MEDIA FOR WHICH DESIGNED | WATER, FRESH SINGLE RESPONSE | | MAXIMUM OPERATING PRESSURE | 350.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | MAXIMUM OPERATING TEMP | 160.0 DEG FAHRENHEIT SINGLE RESPONSE | | VALVE OPERATION METHOD | SOLENOID | | VOLTAGE IN VOLTS AND CURRENT TYPE | 18.0 DC AND | | 30.0 DC | | CURRENT RATING IN AMPS | 0.910 | | FLOW CONTROL DEVICE NORMAL OPERATION POSITION | CLOSED | | CONNECTION TYPE | THREADED EXTERNAL TUBE 1ST END | | THREADED INTERNAL BOSS 2ND END | | CONNECTION STYLE | FLARED (TUBE) 1ST END | | GASKET SEAL(BOSS) 2ND END | | SEAT ANGLE | 37.0 DEGREES 1ST END | | THREAD SERIES DESIGNATOR | UNF 1ST END | | UNJF 2ND END | | NOMINAL THREAD SIZE | 0.4375 INCHES 1ST END | | 0.4375 INCHES 2ND END | | THREAD CLASS | 3A 1ST END | | 3B 2ND END | | THREAD DIRECTION | RIGHT-HAND 1ST END | | RIGHT-HAND 2ND END | | MOUNTING POSITION | HORIZONTAL OR | | VERTICAL | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 96487 | | DESIGN CONTROL REFERENCE | V27200-554 |
|
|