|
|
National Stock Number: 4810-01-086-8707
Federal Supply Class: 4810
National Item Identification Number: 010868707
Description: VALVE,SOLENOID
Detail: A valve having two or more ports with valve stem or pilot needle in a normally open or closed position. It is specifically designed to stop or start or change the flow of fluid by means of the magnetic action of an electric coil on a moveable core or plunger. The valve may be equipped with a manual opening or closing device. For items with three or more ports that utilize a reciprocating slide with recess areas which mate with ports in an integral or replaceable ported sleeve, see VALVE (1), LINEAR, DIRECTIONAL CONTROL. It may be inline or cartridge (manifold) design. Excludes VALVE (1), BUTTERFLY.
|
Manufacturer Information:
96P19AAA | 94830 | PELLERIN MILNOR CORPORATION | 96TBC3AA37 | 94830 | PELLERIN MILNOR CORPORATION | IM646ITEM12 | 94830 | PELLERIN MILNOR CORPORATION |
|
Techincal Specification:
MATERIAL | COPPER ALLOY BODY | | STEEL CORROSION RESISTING FLOW CONTROL DEVICE | | PLASTIC POLYAMIDE SEAT | STYLE DESIGNATOR | CROSS | FLOW CONTROL DEVICE | DISK | MEDIA FOR WHICH DESIGNED | WATER-OIL-GAS SINGLE RESPONSE | VALVE OPERATION METHOD | SOLENOID | VOLTAGE IN VOLTS AND CURRENT TYPE | 120.0 AC | FREQUENCY IN HERTZ | 60.0 | PHASE | SINGLE | CURRENT RATING IN AMPS | 0.100 | FLOW CONTROL DEVICE NORMAL OPERATION POSITION | CLOSED | CONNECTION TYPE | THREADED INTERNAL PIPE 1ST END | | THREADED INTERNAL TUBE 2ND END | CONNECTION STYLE | PLAIN,OPTIONAL END(PIPE) 1ST END | | PLAIN,OPTIONAL END(PIPE) 2ND END | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.313 INCHES 2ND END | THREAD SERIES DESIGNATOR | NPT 1ST END | | UNS 2ND END | NOMINAL THREAD SIZE | 0.125 INCHES 1ST END | | 0.500 INCHES 2ND END | THREAD QUANTITY PER INCH | 18 2ND END | THREAD CLASS | 2B 2ND END | THREAD DIRECTION | RIGHT-HAND 1ST END | | RIGHT-HAND 2ND END | APERTURE DIAMETER | 0.094 INCHES NOMINAL | MOUNTING POSITION | HORIZONTAL OR | | VERTICAL |
|
|