| STYLE DESIGNATOR | ANGLE |
| VALVE OPERATION METHOD | AUTOMATIC |
| MATERIAL | ALUMINUM ALLOY BODY |
| STEEL FLOW CONTROL DEVICE |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/6,ALLOY 2024 FED SPEC SINGLE MATERIAL RESPONSE BODY |
| MIL-S-5059,TYPE 302,ANNEALED MIL SPEC SINGLE MATERIAL RESPONSE FLOW CONTROL DEVICE |
| FLOW CONTROL DEVICE | DISK |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 7.0 POUNDS PER SQUARE INCH SINGLE RESPONSE |
| CONNECTION TYPE | UNTHREADED INTERNAL TUBE 1ST END |
| FLANGE 2ND END |
| CONNECTION STYLE | PLAIN (TUBE) 1ST END |
| FLANGE SHAPE | RECTANGULAR WITH HOLES 2ND END |
| NOMINAL OUTSIDE DIAMETER | 2.375 INCHES 2ND END |
| NOMINAL THICKNESS | 0.187 INCHES 2ND END |
| NOMINAL LENGTH | 3.000 INCHES 2ND END |
| NOMINAL WIDTH | 3.000 INCHES 2ND END |
| BOLT HOLE QUANTITY | 4 2ND END |
| BOLT HOLE NOMINAL DIAMETER | 0.259 INCHES 2ND END |
| CENTER TO CENTER NOMINAL DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.375 INCHES 2ND END |
| CENTER TO CENTER NOMINAL DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 2.375 INCHES 2ND END |
| FLANGE FACE DESIGN | RAISED STRAIGHT 2ND END |
| RAISED FACE NOMINAL HEIGHT | 0.187 INCHES 2ND END |
| RAISED FACE NOMINAL DIAMETER | 2.340 INCHES 2ND END |
| NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 1.875 INCHES 1ST END |
| SPECIAL FEATURES | MOUNTING POSITION: VERTICAL |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 26044 |
| DESIGN CONTROL REFERENCE | 13040 |