| MATERIAL | COPPER ALLOY BODY |
| NICKEL ALLOY 400 AND |
| NICKEL ALLOY FLOW CONTROL DEVICE |
| COPPER ALLOY SEAT |
| STYLE DESIGNATOR | STRAIGHT THRU |
| FLOW CONTROL DEVICE | DISK |
| MEDIA FOR WHICH DESIGNED | STEAM 1ST RESPONSE |
| WATER-OIL-GAS 2ND RESPONSE |
| MAXIMUM OPERATING PRESSURE | 200.0 POUNDS PER SQUARE INCH 1ST RESPONSE |
| 400.0 POUNDS PER SQUARE INCH 2ND RESPONSE |
| MAXIMUM OPERATING TEMP | 425.0 DEG FAHRENHEIT 1ST RESPONSE |
| 425.0 DEG FAHRENHEIT 2ND RESPONSE |
| VALVE OPERATION METHOD | AUTOMATIC |
| CONNECTION TYPE | UNTHREADED INTERNAL PIPE 1ST END |
| UNTHREADED INTERNAL PIPE 2ND END |
| CONNECTION STYLE | SOCKET WITH BRAZING RING (PIPE) 1ST END |
| NOMINAL PIPE SIZE ACCOMMODATED | 0.375 INCHES 1ST END |
| MOUNTING POSITION | HORIZONTAL OR |
| VERTICAL |
| SPECIAL FEATURES | ABW2-W/SLEEVE |
| TEST DATA DOCUMENT | 81349-MIL-S-901C/NAVY SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY 0.375 IN. VALVE SIZE |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 80064 |
| DESIGN CONTROL REFERENCE | 810-1385721REVH |