| MATERIAL | COPPER ALLOY 922 BODY |
| NICKEL ALLOY FLOW CONTROL DEVICE |
| NICKEL ALLOY SEAT |
| NICKEL ALLOY STEM |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-390 FED SPEC SINGLE MATERIAL RESPONSE BODY |
| QQ-N-288 FED SPEC SINGLE MATERIAL RESPONSE FLOW CONTROL DEVICE |
| QQ-N-288 FED SPEC SINGLE MATERIAL RESPONSE SEAT |
| QQ-N-288 FED SPEC SINGLE MATERIAL RESPONSE STEM |
| STYLE DESIGNATOR | ANGLE |
| FLOW CONTROL DEVICE | DISK |
| MEDIA FOR WHICH DESIGNED | STEAM 1ST RESPONSE |
| WATER-OIL-GAS 2ND RESPONSE |
| WATER, SALT 3RD RESPONSE |
| MAXIMUM OPERATING PRESSURE | 200.0 POUNDS PER SQUARE INCH 1ST RESPONSE |
| 400.0 POUNDS PER SQUARE INCH 2ND RESPONSE |
| 400.0 POUNDS PER SQUARE INCH 3RD RESPONSE |
| MAXIMUM OPERATING TEMP | 425.0 DEG FAHRENHEIT 1ST RESPONSE |
| 150.0 DEG FAHRENHEIT 2ND RESPONSE |
| 150.0 DEG FAHRENHEIT 3RD RESPONSE |
| VALVE OPERATION METHOD | MANUAL |
| CONNECTION TYPE | UNTHREADED INTERNAL PIPE ALL ENDS |
| CONNECTION STYLE | SOCKET WITH BRAZING RING ALL ENDS |
| NOMINAL PIPE SIZE ACCOMMODATED | 1.250 INCHES ALL ENDS |
| RENEWABLE SEAT RING TYPE | THREADED |
| BONNET TYPE | INSIDE SCREW |
| BONNET ATTACHMENT METHOD | THREADED |
| FEATURES PROVIDED | BONNET PACKING |
| SPECIAL FEATURES | 2 UNION ENDS W/SILVER BRAZE TAILPIECES PER MIL-F-1183 |
| TEST DATA DOCUMENT | 80064-810-1385722 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |