|
|
|
National Stock Number:
4820-01-088-9712
Federal Supply Class:
4820
National Item Identification Number:
010889712
Description:
VALVE,GLOBE
Detail:
A valve with one inlet and one outlet connection with outlet flow parallel to inlet flow. The flow is controlled by the action of a stem which lifts the disk perpendicularly off the center axis of its seat. The stem is at a 90 degree (1.5708 radians) angle to axis of flow. Excludes VALVE, STOP-CHECK; COCK, SHUTOFF, SCREW STEM; and VALVE, SOLENOID.
|
Manufacturer Information:
| 10141 | 28968 | CIRCOR INSTRUMENTATION TECHNOLOGIES, INC. | | 10141-12 | 28968 | CIRCOR INSTRUMENTATION TECHNOLOGIES, INC. | | 6GN381-1-LNT PL3111 | 32142 | HYDRASEARCH COMPANY, LLC | | 6GN381-1-LNT PL3111 | 54716 | HYDRASEARCH CO., INC. DBA USE CAGE CODE 32142 FOR CATALOGING | | 6GN233-1 PL3332 | 54716 | HYDRASEARCH CO., INC. DBA USE CAGE CODE 32142 FOR CATALOGING | | 2621-906-19 ASS | 96169 | ELECTRIC BOAT CORPORATION | | M3170-2197 | 0ASY6 | DERBYSHIRE MARINE PRODUCTS, LLC | | 6GN382-1 | 54716 | HYDRASEARCH CO., INC. DBA USE CAGE CODE 32142 FOR CATALOGING | | 6GN382-1-LNT | 54716 | HYDRASEARCH CO., INC. DBA USE CAGE CODE 32142 FOR CATALOGING | | 6GN382-1-LNT PL3111 | 54716 | HYDRASEARCH CO., INC. DBA USE CAGE CODE 32142 FOR CATALOGING | | C-8518 | 54716 | HYDRASEARCH CO., INC. DBA USE CAGE CODE 32142 FOR CATALOGING | | C-8518/3111 | 54716 | HYDRASEARCH CO., INC. DBA USE CAGE CODE 32142 FOR CATALOGING |
|
Techincal Specification:
| MATERIAL | STEEL COMP 316 BODY | | STEEL COMP 316 STEM | | MATERIAL DOCUMENT AND CLASSIFICATION | AQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE BODY | | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE STEM | | STYLE DESIGNATOR | STRAIGHT THRU | | FLOW CONTROL DEVICE | NEEDLE | | MEDIA FOR WHICH DESIGNED | WATER-OIL-GAS SINGLE RESPONSE | | MAXIMUM OPERATING PRESSURE | 5000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | MAXIMUM OPERATING TEMP | 160.0 DEG FAHRENHEIT SINGLE RESPONSE | | VALVE OPERATION METHOD | MANUAL | | CONNECTION TYPE | THREADED EXTERNAL TUBE 1ST END | | THREADED INTERNAL BOSS 2ND END | | CONNECTION STYLE | FLARELESS (TUBE) 1ST END | | GASKET SEAL(BOSS) 2ND END | | SEAT ANGLE | 37.0 DEGREES 1ST END | | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.250 INCHES 2ND END | | THREAD SERIES DESIGNATOR | UNJ 1ST END | | UNF 2ND END | | NOMINAL THREAD SIZE | 0.438 INCHES ALL ENDS | | THREAD QUANTITY PER INCH | 20 1ST END | | THREAD CLASS | 3A 1ST END | | 2B 2ND END | | THREAD DIRECTION | RIGHT-HAND ALL ENDS | | BONNET TYPE | INSIDE SCREW | | BONNET ATTACHMENT METHOD | THREADED | | MINIMUM OPERATING TEMP | -65.0 DEG FAHRENHEIT | | PART NAME ASSIGNED BY CONTROLLING AGENCY | GAGE VALVE |
|
|