5305-00-090-4080, SCREW,CLOSE TOLERANCE

National Stock Number:
5305-00-090-4080

Federal Supply Class:
5305

National Item Identification Number:
000904080

Description:
SCREW,CLOSE TOLERANCE

Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Manufacturer Information:

106712-3-5T	80539	SPS TECHNOLOGIES, LLC
BM19051-3-5	97928	HUCK INTL INC
HT8138-3-5T	06950	HOWMET GLOBAL FASTENING SYSTEMS INC
GB510AE3-5T	26512	NORTHROP GRUMMAN SYSTEMS CORPORATION
NAS1580A3H5D	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
HT8138-3-5T	92215	HOWMET GLOBAL FASTENING SYSTEMS INC

Techincal Specification:

NOMINAL THREAD DIAMETER	0.190 INCHES
THREAD QUANTITY PER INCH	32
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.313 INCHES MINIMUM AND
	0.380 INCHES MAXIMUM
FASTENER LENGTH	0.635 INCHES MINIMUM AND
	0.682 INCHES MAXIMUM
MATERIAL	STEEL COMP 4140 OR
	STEEL COMP E4340 OR
	STEEL COMP 6150 OR
	STEEL COMP 8735 OR
	STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR
	MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR
	MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR
	MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR
	MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
HARDNESS RATING	36.0 ROCKWELL C MINIMUM AND
	40.0 ROCKWELL C MAXIMUM OVERALL
MINIMUM TENSILE STRENGTH	160000 POUNDS PER SQUARE INCH
HEAD STYLE	FLAT COUNTERSUNK
HEAD DIAMETER	0.350 INCHES MINIMUM AND
	0.381 INCHES MAXIMUM
COUNTERSINK ANGLE	99.0 DEGREES MINIMUM AND
	101.0 DEGREES MAXIMUM
INTERNAL DRIVE STYLE	HIGH-TORQUE
GRIP LENGTH	0.302 INCHES MINIMUM AND
	0.322 INCHES MAXIMUM
GRIP DIAMETER	0.1885 INCHES MINIMUM AND
	0.1895 INCHES MAXIMUM
SURFACE FINISH	32.0 MICROINCHES BEARING SURFACE OF HEAD
	32.0 MICROINCHES THREADS
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	0.462 INCHES MINIMUM AND
	0.529 INCHES MAXIMUM FIRST HOLE
SHANK UNTHREADED HOLE DIAMETER	0.070 INCHES MINIMUM AND
	0.080 INCHES MAXIMUM FIRST HOLE
SPECIAL FEATURES	INTERNAL DRIVE RIBBED
PART NAME ASSIGNED BY CONTROLLING AGENCY	NAVY SPECIAL PROJECT

Click here to Register for Free 30-day Trial