5305-00-206-2458 SCREW,CAP,SOCKET HEAD Index 5305-00-206-2468 SCREW,CAP,SOCKET HEAD

National Stock Number:
5305-00-206-2463

Federal Supply Class:
5305

National Item Identification Number:
002062463

Description:
SCREW,CLOSE TOLERANCE

Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.


Manufacturer Information:
NAS335-16-580205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE


Techincal Specification:
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER1.723 INCHES MINIMUM ALL HOLES AND 1.743 INCHES MAXIMUM ALL HOLES
COUNTERSINK ANGLE99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH1.889 INCHES MINIMUM AND 1.936 INCHES MAXIMUM
GRIP DIAMETER0.3112 INCHES MINIMUM AND 0.3117 INCHES MAXIMUM
GRIP LENGTH1.364 INCHES MINIMUM AND 1.384 INCHES MAXIMUM
HARDNESS RATING36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER0.625 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD STYLEFLAT COUNTERSUNK
NOMINAL THREAD DIAMETER0.312 INCHES
INTERNAL DRIVE STYLEHEXAGON
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OVERALL OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 4140 OVERALL OR STEEL COMP E4340 OVERALL OR STEEL COMP 6150 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 8740 OVERALL
MINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH
SHANK UNTHREADED HOLE DIAMETER0.076 INCHES NOMINAL ALL HOLES
SINGLE SHEAR STRENGTH730000 POUNDS PER SQUARE INCH
THREAD QUANTITY PER INCH24
THREAD SERIES DESIGNATORUNF
WIDTH ACROSS FLATS0.188 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
SPECIFICATION/STANDARD DATA80205-NAS335 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH32.0 MICROINCHES GRIP
THREAD DIRECTIONRIGHT-HAND
THREAD CLASS3A
THREAD LENGTH0.505 INCHES MINIMUM AND 0.572 INCHES MAXIMUM


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us