|
|
|
National Stock Number:
5305-00-283-7496
Federal Supply Class:
5305
National Item Identification Number:
002837496
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| 66904H7-23 | 50392 | SPS TECHNOLOGIES INC | | 66904H7-23 | 56878 | SPS TECHNOLOGIES, LLC | | HS2623-7223 | 17446 | HUCK INTERNATIONAL, INC | | HS2623-7Z23 | 17446 | HUCK INTERNATIONAL, INC | | HS2623-7Z23 | 97928 | HUCK INTL INC | | HS2623-7223 | 97928 | HUCK INTL INC | | HT308-7-23 | 73197 | HI-SHEAR CORPORATION | | ST3M547-7-23 | 76301 | THE BOEING COMPANY | | HT308-7-23 | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC |
|
Techincal Specification:
| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | | FASTENER LENGTH | 2.022 INCHES MINIMUM AND 2.068 INCHES MAXIMUM | | GRIP DIAMETER | 0.4672 INCHES MINIMUM AND 0.4682 INCHES MAXIMUM | | GRIP LENGTH | 1.428 INCHES MINIMUM AND 1.448 INCHES MAXIMUM | | HEAD DIAMETER | 0.880 INCHES MINIMUM AND 0.890 INCHES MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | HIGH-TORQUE | | MATERIAL DOCUMENT AND CLASSIFICATION | 23-105 FSCM 76301 MFR REF SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | NOMINAL THREAD DIAMETER | 0.438 INCHES | | SPECIFICATION/STANDARD DATA | 76301-ST3-547 MANUFACTURERS STANDARD | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | PS 13145 FSCM 76301 MFR REF SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.574 INCHES MINIMUM AND 0.640 INCHES MAXIMUM | | THREAD QUANTITY PER INCH | 20 | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
|
|