5305-00-500-0982, SCREW,CLOSE TOLERANCE

National Stock Number:
5305-00-500-0982

Federal Supply Class:
5305

National Item Identification Number:
005000982

Description:
SCREW,CLOSE TOLERANCE

Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Manufacturer Information:

106466-5-12	80539	SPS TECHNOLOGIES, LLC
AS195-5-12	84256	AVIBANK MFG., INC.
CA4520-5-12	29372	HOWMET GLOBAL FASTENING SYSTEMS INC.
MS27577-5-12	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	1.113 INCHES MINIMUM AND 1.143 INCHES MAXIMUM FIRST HOLE
COUNTERSINK ANGLE	99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH	1.228 INCHES MINIMUM AND 1.248 INCHES MAXIMUM
GRIP LENGTH	0.750 INCHES MINIMUM AND 0.766 INCHES MAXIMUM
GRIP DIAMETER	0.3108 INCHES MINIMUM AND 0.3117 INCHES MAXIMUM
HARDNESS RATING	36.0 ROCKWELL C MINIMUM AND 41.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER	0.577 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD STYLE	FLAT COUNTERSUNK
INTERNAL DRIVE STYLE	HIGH-TORQUE
LOCKING FEATURE	DETENT BALL GRIP
MATERIAL	STEEL COMP E4340 OR STEEL COMP 4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 4130 OR STEEL COMP 6150 OVERALL
NOMINAL THREAD DIAMETER	0.312 INCHES
SHANK UNTHREADED HOLE DIAMETER	0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE
SURFACE FINISH	63.0 MICROINCHES GRIP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM AND CHROMATE OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.327 INCHES MINIMUM AND 0.362 INCHES MAXIMUM
THREAD QUANTITY PER INCH	24
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)

Click here to Register for Free 30-day Trial