|
|
|
National Stock Number:
5305-01-040-7955
Federal Supply Class:
5305
National Item Identification Number:
010407955
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| BACB30LU6-48 | 06710 | VALLEY-TODECO, INC. | | BACB30LU6-48 | 06725 | SPS TECHNOLOGIES, LLC | | BACB30LU6-48 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | BACB30LU6-48 | 17446 | HUCK INTERNATIONAL, INC | | BACB30LU6-48 | 17943 | FEDERAL MANUFACTURING CORP | | BACB30LU6-48 | 27624 | SPS TECHNOLOGIES LLC | | BACB30LU6-48 | 56875 | M & S ELECTRONICS INC | | BACB30LU6-48 | 57928 | SONIC INDUSTRIES, INC. | | BACB30LU6-48 | 80539 | SPS TECHNOLOGIES, LLC | | BACB30LU6-48 | 81205 | THE BOEING COMPANY | | BACB30LU6-48 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | BACB30LU6-48 | 97928 | HUCK INTL INC |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD DIAMETER | 0.375 INCHES | | THREAD QUANTITY PER INCH | 24 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.553 INCHES MINIMUM AND | | 0.603 INCHES MAXIMUM | | FASTENER LENGTH | 3.563 INCHES MINIMUM AND | | 3.593 INCHES MAXIMUM | | MATERIAL | STEEL COMP E4340 OR | | STEEL COMP 4340 OR | | STEEL COMP 8740 OVERALL | | SURFACE TREATMENT | CADMIUM AND | | CHROMATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HEAD STYLE | FLAT COUNTERSUNK | | HEAD DIAMETER | 0.691 INCHES MINIMUM AND | | 0.765 INCHES MAXIMUM | | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 | | GRIP LENGTH | 2.990 INCHES MINIMUM AND | | 3.010 INCHES MAXIMUM | | GRIP DIAMETER | 0.3735 INCHES MINIMUM AND | | 0.3745 INCHES MAXIMUM | | SURFACE FINISH | 32.0 MICROINCHES GRIP | | 32.0 MICROINCHES THREADS |
|
|