5305-01-069-6957, SCREW ASSEMBLY,PANEL

2610-01-069-6958 TIRE,PNEUMATIC,VEHICULAR

National Stock Number:
5305-01-069-6957

Federal Supply Class:
5305

National Item Identification Number:
010696957

Description:
SCREW ASSEMBLY,PANEL

Detail:
A HEADED, THREADED FASTENING DEVICE OVER WHICH MAY BE ASSEMBLED; (1) A STAND-OFF; (2) A FLANGED BUSHING WITH WASHER(S) AND/OR A SHOULDERED BUSHING WITHOUT A FLANGE, OR IT MAY HAVE AN INTERNALLY THREADED SLEEVE THAT IS AN INTEGRAL PART OF THE SCREW; A WASHER AND AN EXTERNALLY THREAD SELF-LOCKING BUSHING THAT IS DRIVEN BY AN INSERTED DRIVER. ATTACHED TO PANEL BY THREADED BUSHING OR BY FLARING END OF STAND-OFF, OR BUSHING. USED IN CONJUNCTION WITH A SPEED NUT, NUT PLATE, OR DRIVEN INTO A THREADED HOLE IN THE ITEM THAT THE PANEL IS FASTENED TO. MAY BE SPRING LOADED.

Manufacturer Information:

91925-8	15280	NORTHROP GRUMMAN SYSTEMS CORPORATION DIV ES DEFENSIVE SYSTEMS DIVISION
91925-8	26916	NORTHROP GRUMMAN SYSTEMS CORPORATION
CS6006P-8	58998	FASTENER INNOVATION TECHNOLOGY, INC.
DPYR7900-4-A-2	0HDW7	HUCK INTERNATIONAL, INC.
DPYR7900-4-A-2	97928	HUCK INTL INC
FT1115-4-1-2	58794	FASTENER TECHNOLOGY CORP

Techincal Specification:

COUNTERSINK ANGLE	99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH	0.400 INCHES MINIMUM AND 0.420 INCHES MAXIMUM
HEAD DIAMETER	0.323 INCHES MINIMUM AND 0.333 INCHES MAXIMUM
HEAD STYLE	FLAT COUNTERSUNK
MATERIAL ACCOMMODATED THICKNESS	0.062 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION	AMS5732 ASSN STD SINGLE MATERIAL RESPONSE FASTENER
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE STAND-OFF
MATERIAL	IRON ALLOY 660 FASTENER
NOMINAL THREAD DIAMETER	0.112 INCHES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-A-8625 TYPE 1 CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE STAND-OFF
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 TYPE 2 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
SURFACE TREATMENT	ANODIZE STAND-OFF
SURFACE TREATMENT	PASSIVATE FASTENER
THREAD CLASS	2A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.110 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
THREAD QUANTITY PER INCH	40
THREAD SERIES DESIGNATOR	UNC

Click here to Register for Free 30-day Trial