|
|
|
National Stock Number:
5305-01-069-8913
Federal Supply Class:
5305
National Item Identification Number:
010698913
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| NAS1124E3 | 04348 | LAWRENCE ENGINEERING AND SUPPLY INC | | NAS1124E3 | 07851 | NOR-CAL SUPPLY CO | | NAS1124E3 | 08938 | AIR INDUSTRIES CO INC | | NAS1124E3 | 17446 | HUCK INTERNATIONAL, INC | | NAS1124E3 | 23197 | REMCOR PRODUCTS CO | | NAS1124E3 | 30485 | QUALIFIED AIR COMPONENTS INC. | | NAS1124E3 | 30902 | F AND C SALES INC | | NAS1124E3 | 50568 | APCOM INC | | NAS1124E3 | 53606 | PLASTIC AND METAL PRODUCTS CORPORATION | | NAS1124E3 | 56878 | SPS TECHNOLOGIES, LLC | | NAS1124E3 | 58998 | FASTENER INNOVATION TECHNOLOGY, INC. | | NAS1124E3 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | NAS1124E3 | 80539 | SPS TECHNOLOGIES, LLC | | NAS1124E3 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | NAS1124E3 | 97928 | HUCK INTL INC |
|
Techincal Specification:
| FASTENER LENGTH | 0.489 INCHES MINIMUM AND 0.519 INCHES MAXIMUM | | GRIP DIAMETER | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM | | GRIP LENGTH | 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM | | HEAD DIAMETER | 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM | | HEAD HEIGHT | 0.133 INCHES MINIMUM AND 0.150 INCHES MAXIMUM | | HEAD STYLE | FLAT CHAMFER | | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | IRON ALLOY 660 OVERALL | | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | SPECIFICATION/STANDARD DATA | 80205-NAS1124 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD | | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD | | SURFACE FINISH | 32.0 MICROINCHES GRIP | | SURFACE FINISH | 32.0 MICROINCHES THREADS | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.291 INCHES MINIMUM AND 0.341 INCHES MAXIMUM | | THREAD QUANTITY PER INCH | 28 | | THREAD SERIES DESIGNATOR | UNJF |
|
|