|
|
|
National Stock Number:
5305-01-087-3102
Federal Supply Class:
5305
National Item Identification Number:
010873102
Description:
THUMBSCREW
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter. It may have an unthreaded portion with a diameter less than, equal to, or greater than the diameter of the threaded portion. It has either a vertically flattened, circular knurled, or wing type head, all of which are designed for rotation by the thumb and fingers. For items having wrenching facilities such as socket recess, multiple spline or slot heads, use SCREW (as modified) or BOLT (as modified).
|
Manufacturer Information:
| SC-C-706141 | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNF | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | THREAD QUANTITY PER INCH | 28 | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.250 INCHES NOMINAL | | FASTENER LENGTH | 0.750 INCHES NOMINAL | | MATERIAL | STEEL OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | SC-A-706376-80063 MFR REF SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | ENAMEL OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2 MFR REF SINGLE TREATMENT RESPONSE OVERALL | | HEAD STYLE | THUMB NO. 4 | | HEAD HEIGHT | 0.880 INCHES NOMINAL | | WIDTH BETWEEN FLATS | 1.000 INCHES NOMINAL | | POINT STYLE | FLAT | | POINT LENGTH | 0.032 INCHES NOMINAL | | POINT CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | SHOULDER SHAPE | SQUARE OVERALL | | SHOULDER WIDTH ACROSS FLATS | 0.390 INCHES NOMINAL OVERALL | | SHOULDER LENGTH | 1.000 INCHES NOMINAL OVERALL | | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 | | FIRST DIAMETER FROM HEAD | 0.208 INCHES MINIMUM AND | | 0.212 INCHES MAXIMUM | | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.511 INCHES MINIMUM AND | | 0.531 INCHES MAXIMUM | | FEATURES PROVIDED | FINISHED HEAD | | TEST DATA DOCUMENT | 80063-SC-A-706141 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 80063 | | DESIGN CONTROL REFERENCE | SC-C-706141 |
|
|