5305-01-089-5984, SCREW,EXTERNALLY RELIEVED BODY

5305-01-089-5985 SCREW,EXTERNALLY RELIEVED BODY

National Stock Number:
5305-01-089-5984

Federal Supply Class:
5305

National Item Identification Number:
010895984

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.

Manufacturer Information:

2051716-1	96214	RAYTHEON COMPANY
ABS2077-1A1	02310	PATTONAIR USA INC

Techincal Specification:

THREAD SERIES DESIGNATOR	UNC
NOMINAL THREAD DIAMETER	0.138 INCHES
THREAD QUANTITY PER INCH	32
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.246 INCHES NOMINAL
FASTENER LENGTH	0.516 INCHES MINIMUM AND
	0.561 INCHES MAXIMUM
MATERIAL	STEEL COMP 410 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SURFACE TREATMENT	OXIDE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-C-13924 CL 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
MINIMUM TENSILE STRENGTH	125000 POUNDS PER SQUARE INCH
HEAD STYLE	FLAT COUNTERSUNK UNDERCUT
HEAD DIAMETER	0.287 INCHES MINIMUM AND
	0.334 INCHES MAXIMUM
HEAD HEIGHT	0.042 INCHES NOMINAL
COUNTERSINK ANGLE	100.0 DEGREES NOMINAL
INTERNAL DRIVE STYLE	CROSS RECESS TYPE 1
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY	2
FIRST DIAMETER FROM HEAD	0.138 INCHES NOMINAL
SECOND DIAMETER FROM HEAD	0.097 INCHES NOMINAL
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER	0.043 INCHES MINIMUM AND
	0.053 INCHES MAXIMUM
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER	0.243 INCHES NOMINAL
SPECIAL FEATURES	FURNISHED WITH TFE WASHER AND O-RING

Click here to Register for Free 30-day Trial