|
|
|
National Stock Number:
5305-01-090-0737
Federal Supply Class:
5305
National Item Identification Number:
010900737
Description:
SCREW,CAP,HEXAGON HEAD
Detail:
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. The threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. The thread length being the controlled dimension, the grip length is not specified. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, MACHINE; BOLT, EXTERNALLY RELIEVED BODY; BOLT, INTERNAL WRENCHING; and SCREW, CAP, SOCKET HEAD.
|
Manufacturer Information:
| 243837 | 06853 | BENDIX COMMERCIAL VEHICLE SYSTEMS LLC | | 9428638 | 24617 | GENERAL MOTORS CORP | | 9428638 | 56161 | GENERAL DYNAMICS LAND SYSTEMS - CANADA CORPORATION | | 9428638 | 7SK93 | SPECIALTY COMPONENTS & FASTENERS, LLC |
|
Techincal Specification:
| FASTENER LENGTH | 0.590 INCHES MINIMUM AND 0.620 INCHES MAXIMUM | | HEAD HEIGHT | 0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM | | HEAD STYLE | HEXAGON | | HOLE CONFIGURATION STYLE | HEXAGON FLATS | | HOLE DIAMETER | 0.078 INCHES NOMINAL | | HOLE QUANTITY | 3 | | HOLE TYPE | DRILLED | | MATERIAL | STEEL COMP 1005 OR STEEL COMP 1006 OR STEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1023 OR STEEL COMP 1524 OR STEEL COMP 1025 OR STEEL COMP 1026 OR STEEL COMP 1527 OR STEEL COMP 1029 OR STEEL COMP 1030 OR STEEL COMP 1033 OR STEEL COMP 1034 OR STEEL COMP 1035 OR STEEL COMP 1536 OR STEEL COMP 1037 OR STEEL COMP 1038 OR STEEL COMP 1039 OR STEEL COMP 1040 OR STEEL COMP 1541 OVERALL | | NOMINAL THREAD DIAMETER | 0.375 INCHES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | BW-101B-P MFR REF 1ST TREATMENT RESPONSE OR BW-162A-P MFR REF 2ND TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OR ZINC OVERALL | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.490 INCHES MINIMUM AND 0.500 INCHES MAXIMUM | | THREAD QUANTITY PER INCH | 16 | | THREAD SERIES DESIGNATOR | UNC | | WIDTH BETWEEN FLATS | 0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM |
|
|