|
|
|
National Stock Number:
5305-01-319-9428
Federal Supply Class:
5305
National Item Identification Number:
013199428
Description:
SCREW,EXTERNALLY RELIEVED BODY
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.
|
Manufacturer Information:
| 10113683 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 514-90909-002 | 96182 | SAFRAN ELECTRONICS & DEFENSE, AVIONICS USA, LLC |
|
Techincal Specification:
| DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.966 INCHES NOMINAL | | COUNTERSINK ANGLE | 82.0 DEGREES NOMINAL | | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 | | FASTENER LENGTH | 1.346 INCHES NOMINAL | | FIRST DIAMETER FROM HEAD | 0.078 INCHES NOMINAL | | HEAD DIAMETER | 0.215 INCHES NOMINAL | | HEAD STYLE | OVAL COUNTERSUNK | | INTERNAL DRIVE STYLE | SLOT | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | NOMINAL THREAD DIAMETER | 0.112 INCHES | | POINT CHAMFER ANGLE | 60.0 DEGREES NOMINAL | | POINT LENGTH | 0.096 INCHES NOMINAL | | POINT STYLE | CONE | | THREAD LENGTH | 0.188 INCHES NOMINAL | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 40 | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
|
|