5305-01-324-0980, SCREW,EXTERNALLY RELIEVED BODY

National Stock Number:
5305-01-324-0980

Federal Supply Class:
5305

National Item Identification Number:
013240980

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.

Manufacturer Information:

1132001G59	28528	ITT INDUSTRIES INC ITT AEROSPACE COMMUNICATIONS DIV EAST
1132001G59	31550	L3HARRIS TECHNOLOGIES, INC.
6111-SS-1032-68	06540	NEW HAVEN MFG CORP AMATOM ELECTRONIC HARDWARE DIV
6111-SS-1032-6B	06540	NEW HAVEN MFG CORP AMATOM ELECTRONIC HARDWARE DIV
6111-SS-1032-6B	1YGB8	CAREY MANUFACTURING CO, INC

Techincal Specification:

DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER	0.396 INCHES MINIMUM AND 0.416 INCHES MAXIMUM
COLOR	BLACK OVERALL
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY	1
FASTENER LENGTH	1.062 INCHES NOMINAL
FIRST DIAMETER FROM HEAD	0.125 INCHES MINIMUM AND 0.135 INCHES MAXIMUM
HEAD DIAMETER	0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM
HEAD HEIGHT	0.422 INCHES MINIMUM AND 0.452 INCHES MAXIMUM
HEAD STYLE	KNURLED NO. 4
INTERNAL DRIVE STYLE	SLOT
MATERIAL DOCUMENT AND CLASSIFICATION	ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP 303 OVERALL
POINT LENGTH	0.156 INCHES NOMINAL
POINT STYLE	BALL
POINT CHAMFER ANGLE	85.0 DEGREES MINIMUM AND 95.0 DEGREES MAXIMUM
POINT DIAMETER	0.114 INCHES MINIMUM AND 0.146 INCHES MAXIMUM
PROPRIETARY CHARACTERISTICS	PACS
NOMINAL THREAD DIAMETER	0.190 INCHES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-C-13924 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	OXIDE OVERALL
THREAD CLASS	2A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
THREAD QUANTITY PER INCH	32
THREAD SERIES DESIGNATOR	UNF

Click here to Register for Free 30-day Trial