|
|
|
National Stock Number:
5305-01-441-7458
Federal Supply Class:
5305
National Item Identification Number:
014417458
Description:
SCREW,WOOD
Detail:
An unhardened externally threaded fastener whose continuous thread extends from a gimlet point for a distance of approximately two-thirds of the length of the screw and which is designed to be driven with an inserted driver.
|
Manufacturer Information:
| AN550-6R16 | 88044 | AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE | | FFS111ANDSTYLE2 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | MS35492-36 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| COUNTERSINK ANGLE | 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM | | FASTENER LENGTH | 1.940 INCHES MINIMUM AND 2.000 INCHES MAXIMUM | | HEAD DIAMETER | 0.244 INCHES MINIMUM AND 0.279 INCHES MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | CROSS RECESS TYPE III | | MATERIAL | STEEL COMP 1010 OR STEEL COMP 1012 OR STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1108 OR STEEL COMP 1109 OR STEEL COMP 1110 OR STEEL COMP 1116 OR STEEL COMP 1117 OR STEEL COMP 1118 OVERALL | | NONDEFINITIVE SPEC/STD DATA | 1 TYPE AND 2C STYLE | | NONMACHINE NOMINAL THREAD DIAMETER | 0.138 INCHES | | NONMACHINE THREAD STYLE | WOOD SCREW (TYPE WD) | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 3,JDBMIL-C-81562,TYPE 2,CLASS 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TYPE 2,CLASS 3 FED SPEC 2ND TREATMENT RESPONSE OR MIL-C-81562,TYPE 2,CLASS 3 MIL SPEC 2ND TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND CHROMATE OR ZINC AND CHROMATE OVERALL |
|
|