|
|
|
National Stock Number:
5306-00-080-9962
Federal Supply Class:
5306
National Item Identification Number:
000809962
Description:
BOLT,SHEAR
Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.
|
Manufacturer Information:
| 27574 | 99167 | HAMILTON SUNDSTRAND CORPORATION | | 57778 | 56878 | SPS TECHNOLOGIES, LLC |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNF | | NOMINAL THREAD DIAMETER | 0.312 INCHES | | THREAD QUANTITY PER INCH | 24 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 2.759 INCHES MINIMUM | | FASTENER LENGTH | 3.009 INCHES NOMINAL | | MATERIAL | STEEL COMP 4140 OR | | STEEL COMP E4340 OR | | STEEL COMP 6150 OR | | STEEL COMP 8735 OR | | STEEL COMP 8740 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR | | MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR | | MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR | | MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR | | MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | NAS-672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 39.0 ROCKWELL C MINIMUM AND | | 43.0 ROCKWELL C MAXIMUM OVERALL | | MINIMUM TENSILE STRENGTH | 180000 POUNDS PER SQUARE INCH | | HEAD STYLE | DOUBLE HEXAGON W/HOLE | | HEAD HEIGHT | 0.348 INCHES NOMINAL | | WIDTH BETWEEN FLATS | 0.375 INCHES NOMINAL | | EXTENDED WASHER DIAMETER | 0.526 INCHES NOMINAL | | EXTENDED WASHER THICKNESS | 0.082 INCHES NOMINAL | | HOLE CONFIGURATION STYLE | DOUBLE HEXAGON LONGITUDINAL HOLE | | HOLE TYPE | DRILLED | | HOLE QUANTITY | 4 | | HOLE DIAMETER | 0.050 INCHES MINIMUM AND | | 0.060 INCHES MAXIMUM | | GRIP LENGTH | 0.220 INCHES MINIMUM AND | | 0.280 INCHES MAXIMUM | | GRIP DIAMETER | 0.3110 INCHES MINIMUM AND | | 0.3120 INCHES MAXIMUM | | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD | | 32.0 MICROINCHES GRIP | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 99167 | | DESIGN CONTROL REFERENCE | 27574 |
|
|