5306-00-140-4640, BOLT,SHEAR

National Stock Number:
5306-00-140-4640

Federal Supply Class:
5306

National Item Identification Number:
001404640

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.

Manufacturer Information:

VS2667-4P181D	06950	HOWMET GLOBAL FASTENING SYSTEMS INC
VS2667-4P181D	92215	HOWMET GLOBAL FASTENING SYSTEMS INC
VS2667-4P18D	92215	HOWMET GLOBAL FASTENING SYSTEMS INC

Techincal Specification:

DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	11.534 INCHES MINIMUM AND 11.584 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH	11.722 INCHES MINIMUM AND 11.752 INCHES MAXIMUM
GRIP DIAMETER	0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH	11.302 INCHES MINIMUM AND 11.322 INCHES MAXIMUM
HEAD HEIGHT	0.125 INCHES MINIMUM AND 0.140 INCHES MAXIMUM
HEAD STYLE	DISHED HEXAGON
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	IRON ALLOY 660 OVERALL
MINIMUM TENSILE STRENGTH	160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.250 INCHES
SHANK UNTHREADED HOLE DIAMETER	0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE
WIDTH BETWEEN FLATS	0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.425 INCHES MINIMUM
THREAD QUANTITY PER INCH	28
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)

Click here to Register for Free 30-day Trial