5306-00-150-3562, BOLT,SHEAR

National Stock Number:
5306-00-150-3562

Federal Supply Class:
5306

National Item Identification Number:
001503562

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.

Manufacturer Information:

GB511W6-25	26512	NORTHROP GRUMMAN SYSTEMS CORPORATION
LWB22-6-25	56878	SPS TECHNOLOGIES, LLC
LWB22-6-25	80539	SPS TECHNOLOGIES, LLC

Techincal Specification:

EXTENDED WASHER DIAMETER	0.639 INCHES MINIMUM AND 0.649 INCHES MAXIMUM
EXTENDED WASHER THICKNESS	0.081 INCHES MINIMUM AND 0.101 INCHES MAXIMUM
GRIP LENGTH	1.552 INCHES MINIMUM AND 1.572 INCHES MAXIMUM
HARDNESS RATING	46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT	0.378 INCHES MINIMUM AND 0.398 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 6485 ASSN STD 1ST MATERIAL RESPONSE OR AMS 6487 ASSN STD 1ST MATERIAL RESPONSE OR SPS-M-107 FSCM 56878 MFR REF 2ND MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER	0.375 INCHES
PART NAME ASSIGNED BY CONTROLLING AGENCY	NAVY SPECIAL PROJECT
WIDTH BETWEEN FLATS	0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM
SPECIFICATION/STANDARD DATA	26512-GB511W6 MANUFACTURERS STANDARD
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	NAS 672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.535 INCHES MINIMUM AND 0.585 INCHES MAXIMUM
THREAD QUANTITY PER INCH	24
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)

Click here to Register for Free 30-day Trial