5306-01-056-2942, BOLT,MACHINE

National Stock Number:
5306-01-056-2942

Federal Supply Class:
5306

National Item Identification Number:
010562942

Description:
BOLT,MACHINE

Detail:
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE.

Manufacturer Information:

5306PL0677171	9009H	INSPEKTORAT WSPARCIA SIL ZBROJNYCH
907892	A274N	SCANDINAVIAN MANUFACTURING SCAMA AB
MS90725-35	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
FF-S-85	81348	FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
MS90725-35	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

THREAD DIRECTION	RIGHT-HAND
FASTENER LENGTH	1.063 INCHES MINIMUM AND
	1.125 INCHES MAXIMUM
MATERIAL	STEEL OVERALL
THREAD LENGTH	0.953 INCHES MINIMUM AND
	1.125 INCHES MAXIMUM
HEAD STYLE	HEXAGON
THREAD SERIES DESIGNATOR	UNC
NOMINAL THREAD DIAMETER	0.312 INCHES
THREAD QUANTITY PER INCH	18
THREAD CLASS	2A
SURFACE TREATMENT	CADMIUM AND
	CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
HARDNESS RATING	25.0 ROCKWELL C MINIMUM AND
	34.0 ROCKWELL C MAXIMUM OVERALL
MINIMUM TENSILE STRENGTH	120000 POUNDS PER SQUARE INCH
HEAD HEIGHT	0.195 INCHES MINIMUM AND
	0.211 INCHES MAXIMUM
WIDTH BETWEEN FLATS	0.489 INCHES MINIMUM AND
	0.500 INCHES MAXIMUM
FEATURES PROVIDED	FINISHED HEAD
TEST DATA DOCUMENT	81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
SPECIAL TEST FEATURES	SPECIAL QUALITY CONTROL TESTING
DEPARTURE FROM CITED DOCUMENT	AS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS
DEPARTURE FROM CITED DESIGNATOR	AS MOD BY MATL
NONDEFINITIVE SPEC/STD DATA	2 TYPE AND
	5 GRADE AND
	10P STYLE
CRITICALITY CODE JUSTIFICATION	ZZZX
SPEC/STD CONTROLLING DATA
MANUFACTURERS CODE	81348
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE	FF-S-85

Click here to Register for Free 30-day Trial