|
|
|
National Stock Number:
5306-01-070-1713
Federal Supply Class:
5306
National Item Identification Number:
010701713
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| 160D960123-19 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 160D960123-19 | 79RG9 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 2.353 INCHES NOMINAL FIRST HOLE | | FASTENER LENGTH | 2.538 INCHES NOMINAL | | GRIP DIAMETER | 0.6230 INCHES MINIMUM AND 0.6240 INCHES MAXIMUM | | GRIP LENGTH | 1.973 INCHES MINIMUM AND 1.978 INCHES MAXIMUM | | HEAD HEIGHT | 0.296 INCHES MINIMUM AND 0.328 INCHES MAXIMUM | | HEAD STYLE | HEXAGON | | MATERIAL | STEEL COMP 4340 OVERALL | | NOMINAL THREAD DIAMETER | 0.625 INCHES | | SHANK UNTHREADED HOLE DIAMETER | 0.141 INCHES MINIMUM AND 0.145 INCHES MAXIMUM FIRST HOLE | | SPECIAL FEATURES | 0.120 SPHERICAL RADIUS 30.0 DEGREE ON POINT | | WIDTH BETWEEN FLATS | 0.928 INCHES MINIMUM AND 0.940 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.560 INCHES MINIMUM AND 0.565 INCHES MAXIMUM | | THREAD QUANTITY PER INCH | 18 | | THREAD SERIES DESIGNATOR | UNJF |
|
|