|
|
|
National Stock Number:
5306-01-087-7013
Federal Supply Class:
5306
National Item Identification Number:
010877013
Description:
BOLT,SHEAR
Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.
|
Manufacturer Information:
| AIC260E-6-34 | 06725 | SPS TECHNOLOGIES, LLC | | C305-6-34 | 27624 | SPS TECHNOLOGIES LLC | | C305-6-34 | 56878 | SPS TECHNOLOGIES, LLC | | EWB26-6-34 | 56878 | SPS TECHNOLOGIES, LLC | | C305-6-34 | 81755 | LOCKHEED MARTIN CORPORATION | | C305-6-34 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | VS2005-6-34 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | EWB26-6-34 | 80539 | SPS TECHNOLOGIES, LLC | | VS2005-6-34 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD DIAMETER | 0.375 INCHES | | THREAD QUANTITY PER INCH | 24 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.682 INCHES MINIMUM AND | | 0.732 INCHES MAXIMUM | | FASTENER LENGTH | 2.817 INCHES MINIMUM AND | | 2.847 INCHES MAXIMUM | | MATERIAL | STEEL COMP H11 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6485 ASSN STD SINGLE MATERIAL RESPONSE OR | | AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND | | CHROMATE OR | | CADMIUM AND | | NICKEL OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-8837,TYPE 2 CL 3 MIL SPEC 1ST TREATMENT RESPONSE OR | | AMS 2416 ASSN STD 2ND TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 51.0 ROCKWELL C MINIMUM AND | | 54.0 ROCKWELL C MAXIMUM OVERALL | | MINIMUM TENSILE STRENGTH | 260000 POUNDS PER SQUARE INCH | | HEAD STYLE | DOUBLE HEXAGON W/HOLE | | HEAD HEIGHT | 0.405 INCHES NOMINAL | | WIDTH BETWEEN FLATS | 0.492 INCHES MINIMUM AND | | 0.502 INCHES MAXIMUM | | EXTENDED WASHER DIAMETER | 0.715 INCHES MINIMUM AND | | 0.725 INCHES MAXIMUM | | EXTENDED WASHER THICKNESS | 0.075 INCHES NOMINAL | | GRIP LENGTH | 2.115 INCHES MINIMUM AND | | 2.135 INCHES MAXIMUM | | GRIP DIAMETER | 0.3735 INCHES MINIMUM AND | | 0.3745 INCHES MAXIMUM | | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
|
|