|
|
|
National Stock Number:
5306-01-088-8919
Federal Supply Class:
5306
National Item Identification Number:
010888919
Description:
BOLT,SHEAR
Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.
|
Manufacturer Information:
| 72539-1-24 | 56878 | SPS TECHNOLOGIES, LLC | | 72539-1-24 | 80539 | SPS TECHNOLOGIES, LLC | | GB511BB1-24 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | GB511GL1-24 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | PBF1504-1-24 | 27624 | SPS TECHNOLOGIES LLC | | 84683X-10-24 | 56878 | SPS TECHNOLOGIES, LLC | | VCC0092-1-24 | 06710 | VALLEY-TODECO, INC. |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD DIAMETER | 0.625 INCHES | | THREAD QUANTITY PER INCH | 18 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.843 INCHES MINIMUM AND | | 0.893 INCHES MAXIMUM | | FASTENER LENGTH | 2.353 INCHES MINIMUM AND | | 2.383 INCHES MAXIMUM | | MATERIAL | NICKEL ALLOY 718 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH | | HEAD STYLE | DOUBLE HEXAGON W/HOLE | | HEAD HEIGHT | 0.613 INCHES MINIMUM AND | | 0.623 INCHES MAXIMUM | | WIDTH BETWEEN FLATS | 0.679 INCHES MINIMUM AND | | 0.690 INCHES MAXIMUM | | EXTENDED WASHER DIAMETER | 1.035 INCHES MINIMUM AND | | 1.050 INCHES MAXIMUM | | EXTENDED WASHER THICKNESS | 0.145 INCHES MINIMUM AND | | 0.155 INCHES MAXIMUM | | GRIP LENGTH | 1.490 INCHES MINIMUM AND | | 1.510 INCHES MAXIMUM | | GRIP DIAMETER | 0.6860 INCHES MINIMUM AND | | 0.6870 INCHES MAXIMUM |
|
|