|
|
|
National Stock Number:
5306-01-091-6905
Federal Supply Class:
5306
National Item Identification Number:
010916905
Description:
BOLT,SHEAR
Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.
|
Manufacturer Information:
| MS14163-09024 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-8837 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 46.0 ROCKWELL C MINIMUM AND | | 50.0 ROCKWELL C MAXIMUM OVERALL | | MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH | | HEAD STYLE | SPLINE EXTENDED WASHER | | HEAD HEIGHT | 0.495 INCHES MINIMUM AND | | 0.515 INCHES MAXIMUM | | WIDTH BETWEEN FLATS | 0.711 INCHES MINIMUM AND | | 0.717 INCHES MAXIMUM | | EXTENDED WASHER DIAMETER | 0.928 INCHES MINIMUM AND | | 0.938 INCHES MAXIMUM | | EXTENDED WASHER THICKNESS | 0.102 INCHES MINIMUM AND | | 0.122 INCHES MAXIMUM | | GRIP LENGTH | 1.490 INCHES MINIMUM AND | | 1.510 INCHES MAXIMUM | | GRIP DIAMETER | 0.5605 INCHES MINIMUM AND | | 0.5615 INCHES MAXIMUM | | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD | | 32.0 MICROINCHES GRIP | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 96906 | | DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MS14163-09024 | | THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD DIAMETER | 0.562 INCHES | | THREAD QUANTITY PER INCH | 18 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 1.000 INCHES MINIMUM AND | | 1.050 INCHES MAXIMUM | | FASTENER LENGTH | 2.510 INCHES MINIMUM AND | | 2.540 INCHES MAXIMUM | | MATERIAL | STEEL COMP H11 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND | | CHROMATE OVERALL |
|
|