5905-01-328-5365 RESISTOR,VARIABLE,NONWIRE WOUND, Index 4710-01-328-5367 TUBE,METALLIC

National Stock Number:
5306-01-328-5366

Federal Supply Class:
5306

National Item Identification Number:
013285366

Description:
BOLT,CLOSE TOLERANCE

Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.


Manufacturer Information:
SS5115-5-456878SPS TECHNOLOGIES, LLC
SS5115-5-478286SIKORSKY AIRCRAFT CORPORATION


Techincal Specification:
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER0.634 INCHES MINIMUM AND 0.664 INCHES MAXIMUM ALL HOLES
FASTENER LENGTH0.719 INCHES MINIMUM AND 0.739 INCHES MAXIMUM
GRIP DIAMETER0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH0.250 INCHES MINIMUM AND 0.266 INCHES MAXIMUM
HEAD HEIGHT0.157 INCHES MINIMUM AND 0.172 INCHES MAXIMUM
HEAD STYLECROWNED HEXAGON
HOLE CONFIGURATION STYLEHEXAGON CORNERS
HOLE DIAMETER0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
HOLE QUANTITY3
HOLE TYPEDRILLED
LOCKING FEATUREDETENT BALL THREADS
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5629 ASSN STD SINGLE MATERIAL RESPONSE FASTENER
MATERIALSTEEL COMP XM-13 FASTENER
MATERIALSTEEL COMP 631 LOCKING FEATURE
III PART NAME ASSIGNED BY CONTROLLING AGENCYNAVY SPECIAL PROJECT
PROPRIETARY CHARACTERISTICSPACS
MINIMUM TENSILE STRENGTH7700 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.312 INCHES
SHANK UNTHREADED HOLE DIAMETER0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM ALL HOLES
WIDTH BETWEEN FLATS0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM
SURFACE FINISH63.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE FINISH32.0 MICROINCHES GRIP
SURFACE FINISH32.0 MICROINCHES THREADS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
SURFACE TREATMENTPASSIVATE FASTENER
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.444 INCHES MINIMUM AND 0.489 INCHES MAXIMUM
THREAD QUANTITY PER INCH24
THREAD SERIES DESIGNATORUNJF


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us