|
|
|
National Stock Number:
5306-01-440-4206
Federal Supply Class:
5306
National Item Identification Number:
014404206
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| 11797A14U064 | 59563 | REID PRODUCTS INC. | | STSBG000A14U064 | 06710 | VALLEY-TODECO, INC. | | STSBG000A14U064 | 06725 | SPS TECHNOLOGIES, LLC | | STSBG000A14U064 | 56878 | SPS TECHNOLOGIES, LLC | | STSBG000A14U064 | 98897 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| GRIP LENGTH | 4.000 INCHES NOMINAL | | HEAD HEIGHT | 0.468 INCHES NOMINAL | | HEAD MINOR DIAMETER | 1.414 INCHES NOMINAL | | HEAD STYLE | SPLINE DRIVE SHEAR HEAD | | MATERIAL | STEEL COMP H11 OVERALL | | PROPRIETARY CHARACTERISTICS | PACS | | NOMINAL THREAD DIAMETER | 0.8750 INCHES | | SURFACE TREATMENT | NICKEL OVERALL AND CADMIUM OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.992 INCHES NOMINAL | | THREAD QUANTITY PER INCH | 18 | | THREAD SERIES DESIGNATOR | UNJF | | FASTENER LENGTH | 4.992 INCHES NOMINAL | | GRIP DIAMETER | 0.8726 INCHES MINIMUM AND 0.8732 INCHES MAXIMUM |
|
|