5306-01-627-7537, BOLT,SHEAR

5961-01-627-3591 SEMICONDUCTOR DEVICE,DIODE

National Stock Number:
5306-01-627-7537

Federal Supply Class:
5306

National Item Identification Number:
016277537

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.

Manufacturer Information:

MS14181-09034P	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
MS14181-09034P	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

EXTENDED WASHER DIAMETER	1.037 INCHES MINIMUM AND 1.047 INCHES MAXIMUM
EXTENDED WASHER THICKNESS	0.071 INCHES MINIMUM AND 0.091 INCHES MAXIMUM
FASTENER LENGTH	3.070 INCHES MINIMUM AND 3.100 INCHES MAXIMUM
GRIP DIAMETER	0.5605 INCHES MINIMUM AND 0.5615 INCHES MAXIMUM
GRIP LENGTH	2.115 INCHES MINIMUM AND 2.225 INCHES MAXIMUM
HEAD HEIGHT	0.495 INCHES MINIMUM AND 0.515 INCHES MAXIMUM
HEAD MINOR DIAMETER	0.610 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
HEAD STYLE	SPLINE EXTENDED WASHER
PART NAME ASSIGNED BY CONTROLLING AGENCY	BOLT, TENSION; NICKEL ALLOY 718, 220 KSI FTU; EXTERNA WRENCHING, SPLINE DRIVE, FLANGED HEAD
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5662 OR AMS 5663 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	NICKEL ALLOY 718 OVERALL
MINIMUM TENSILE STRENGTH	220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.5625 INCHES
SPECIAL FEATURES	WRENCHING ELEMENT 22
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416, TYPE II, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.960 INCHES NOMINAL
THREAD QUANTITY PER INCH	18
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)

Click here to Register for Free 30-day Trial