|
|
|
National Stock Number:
5307-01-043-6306
Federal Supply Class:
5307
National Item Identification Number:
010436306
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 27636-21 | 23280 | CUSTOM ELECTRONICS, INC. | | 27636-21 | 99167 | HAMILTON SUNDSTRAND CORPORATION | | 27636-22 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| MATERIAL | STEEL COMP 4140 OR | | STEEL COMP 8740 | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR | | AMS 6382 ASSN STD 1ST MATERIAL RESPONSE OR | | MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR | | AMS 6322 ASSN STD 2ND MATERIAL RESPONSE | | SURFACE TREATMENT | CADMIUM AND | | CHROMATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | OVERALL LENGTH | 1.521 INCHES MINIMUM AND | | 1.541 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | UNC STUD THREAD | | NOMINAL THREAD SIZE | 0.250 INCHES NUT THREAD | | 0.250 INCHES STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | 3A STUD THREAD | | THREAD QUANTITY PER INCH | 28 NUT THREAD | | 20 STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.688 INCHES MINIMUM AND | | 0.760 INCHES MAXIMUM NUT THREAD | | 0.688 INCHES MINIMUM AND | | 0.788 INCHES MAXIMUM STUD THREAD |
|
|