|
|
|
National Stock Number:
5307-01-070-9176
Federal Supply Class:
5307
National Item Identification Number:
010709176
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 303101-6 | 03104 | TELEDYNE BROWN ENGINEERING, INC. |
|
Techincal Specification:
| COTTER PIN HOLE DIAMETER | 0.053 INCHES MINIMUM AND 0.058 INCHES MAXIMUM FIRST HOLE | | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.110 INCHES MAXIMUM FIRST HOLE | | HARDNESS RATING | 28.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM | | OVERALL LENGTH | 0.810 INCHES NOMINAL | | MATERIAL | STEEL | | NOMINAL THREAD SIZE | 0.190 INCHES STUD THREAD | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A NUT THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.340 INCHES MINIMUM AND 0.410 INCHES MAXIMUM NUT THREAD | | THREAD LENGTH | 0.380 INCHES MINIMUM AND 0.440 INCHES MAXIMUM STUD THREAD | | THREAD QUANTITY PER INCH | 24 STUD THREAD | | THREAD PITCH DIAMETERS | +0.1728 TO 0.1743 INCHES STUD THREAD | | THREAD SERIES DESIGNATOR | UNS STUD THREAD |
|
|