|
|
|
National Stock Number:
5307-01-070-9179
Federal Supply Class:
5307
National Item Identification Number:
010709179
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 302808-6 | 03104 | TELEDYNE BROWN ENGINEERING, INC. |
|
Techincal Specification:
| COTTER PIN HOLE DIAMETER | 0.065 INCHES MINIMUM AND 0.072 INCHES MAXIMUM FIRST HOLE | | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.110 INCHES MAXIMUM FIRST HOLE | | HARDNESS RATING | 28.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM | | OVERALL LENGTH | 2.310 INCHES NOMINAL | | MATERIAL | STEEL | | NOMINAL THREAD SIZE | 0.250 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.250 INCHES STUD THREAD | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A NUT THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.620 INCHES MINIMUM AND 0.690 INCHES MAXIMUM NUT THREAD | | THREAD LENGTH | 0.620 INCHES MINIMUM AND 0.690 INCHES MAXIMUM STUD THREAD | | THREAD QUANTITY PER INCH | 20 STUD THREAD | | THREAD QUANTITY PER INCH | 28 NUT THREAD | | THREAD PITCH DIAMETERS | +0.2278 TO 0.2293 INCHES STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD SERIES DESIGNATOR | UNS STUD THREAD |
|
|