5310-00-167-0764 WASHER,FLAT Index 5310-00-167-0766 WASHER,FLAT

National Stock Number:
5310-00-167-0765

Federal Supply Class:
5310

National Item Identification Number:
001670765

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
1000283GT82MDT ARMOR CORP
10196465A486GNIMIKKEISTOKESKUS NCB FINLAND
4197420-00405869RAYTHEON COMPANY
35473P4225734BOSCH SECURITY SYSTEMS, LLC
112575A45152OSHKOSH CORP
112575A75Q65OSHKOSH DEFENSE LLC
906111018876U S ARMY AVIATION AND MISSILE COMMAND
810450-0032345DEFENSE REDUCTION AGENCY
71836577445RTX CORPORATION
4197420-00482577RAYTHEON COMPANY
5310PL01400739009HINSPEKTORAT WSPARCIA SIL ZBROJNYCH
AN97099237AIRFORCE-NAVY AERONAUTICAL DESIGN STANDARD
5310001670765A00AME.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE
5310001670765SCY13E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE
AN970-30EER9ANIXTER INC.
AN970-310630ANILLO INDUSTRIES LLC
AN970-356563ALIGN AEROSPACE LLC
AN970-380205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
NASM970-380205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
AN970-388044AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
MS63040-396906MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
AN970-399237AIRFORCE-NAVY AERONAUTICAL DESIGN STANDARD
AN970-3A0126LEONARDO SPA HELICOPTERS DIVISION -PRODUCTION SITE
AN970-3A0311TECNO TRADE S.R.L.
AN970-3AC910AERTEKNO S.R.L.


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HOLE DIAMETER0.193 INCHES MINIMUM AND 0.213 INCHES MAXIMUM
OVERALL DIAMETER0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM
MATERIALSTEEL OVERALL
PERIPHERAL SHAPE STYLEROUND
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCADMIUM OVERALL
THICKNESS0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us