5310-00-167-0802 WASHER,FLAT Index 5310-00-167-0804 WASHER,FLAT

National Stock Number:
5310-00-167-0803

Federal Supply Class:
5310

National Item Identification Number:
001670803

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
10116604A486GNIMIKKEISTOKESKUS NCB FINLAND
122450PC1010001NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
12Z22-47210001NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
158255PC3110001NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
166216PC510001NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
145-4510955-5651563ROHR, INC.
21C1530-20607482GENERAL ELECTRIC COMPANY
5110-20000KDP7KIDDE-FENWAL, LLC
381637PC9910001NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
280457PC1210001NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
166216PC50010001NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
330005B56232LOCKHEED MARTIN CORPORATION
3005349030B0897FN HERSTAL S.A.
210115C516D9182ZF INDUSTRIEANTRIEBE WITTEN GMBH
92-11-504320CURTISS-WRIGHT CONTROLS INTEGRATED SENSING, INC.
84029109786ORDNANCE SUPPLY OFFICE
709173PC1010001NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
85123018876U S ARMY AVIATION AND MISSILE COMMAND
AN960C51681352AIR FORCE-NAVY AERONAUTICAL SPECIFICATIONS PROMULGATED BY AERONAUTICAL STANDARDS GROUP
AN960C51688044AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
5310PL01946589009HINSPEKTORAT WSPARCIA SIL ZBROJNYCH
5310PL07224879009HINSPEKTORAT WSPARCIA SIL ZBROJNYCH
5310PL13895389009HINSPEKTORAT WSPARCIA SIL ZBROJNYCH
5410-16196214RAYTHEON COMPANY
5310001670803A00AME.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE
672075-197D9182ZF INDUSTRIEANTRIEBE WITTEN GMBH
AN960C516D9182ZF INDUSTRIEANTRIEBE WITTEN GMBH
945723-2152D9182ZF INDUSTRIEANTRIEBE WITTEN GMBH
938.77.61.017S4080PILATUS AIRCRAFT LTD
5310001670803SCY13E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE
NAS1149C0563R80205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
FFW9281348FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
NAS1149C0563R88044AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
B90-0T494135NAVAL ORDNANCE STANDARDS
NAS1149C0563RA0126LEONARDO SPA HELICOPTERS DIVISION -PRODUCTION SITE
NAS1149C0563RD9182ZF INDUSTRIEANTRIEBE WITTEN GMBH
LYC502C516D9182ZF INDUSTRIEANTRIEBE WITTEN GMBH
Z00.N5741504390F0086SOCATA
ASNA2397C516F6198AIRBUS OPERATIONS


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HOLE DIAMETER0.318 INCHES MINIMUM AND 0.338 INCHES MAXIMUM
OVERALL DIAMETER0.557 INCHES MINIMUM AND 0.582 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5059 MIL SPEC 1ST MATERIAL RESPONSE AND MIL-S-6721 MIL SPEC 2ND MATERIAL RESPONSE AND MIL-S-6721 MIL SPEC 3RD MATERIAL RESPONSE AND MIL-S-6721 MIL SPEC 4TH MATERIAL RESPONSE OVERALL
MATERIALSTEEL CORROSION RESISTING OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OVERALL
PERIPHERAL SHAPE STYLEROUND
THICKNESS0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us