5310-00-167-0807 WASHER,FLAT Index 5310-00-167-0809 WASHER,FLAT

National Stock Number:
5310-00-167-0808

Federal Supply Class:
5310

National Item Identification Number:
001670808

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
10116606A486GNIMIKKEISTOKESKUS NCB FINLAND
1075DP063-625-1171790CURTISS-WRIGHT CORP AIRPLANE DIV
5310PL13333739009HINSPEKTORAT WSPARCIA SIL ZBROJNYCH
5310PL21304719009HINSPEKTORAT WSPARCIA SIL ZBROJNYCH
310-0483-00095104ALCATEL-LUCENT HOLDINGS INC.
1561628D9182ZF INDUSTRIEANTRIEBE WITTEN GMBH
90735406840BENDIX CORP THE
90735406848HONEYWELL INTERNATIONAL INC
852879218876U S ARMY AVIATION AND MISSILE COMMAND
A-9667-1CC38151MARATHON ELECTRIC, LLC
8771790CURTISS-WRIGHT CORP AIRPLANE DIV
A80-5674080HARVARD INDUSTRIES
65E316A-4323A ITEM 699551GOODRICH CORPORATION
AN960C1016D9182ZF INDUSTRIEANTRIEBE WITTEN GMBH
WC-21367-1 PIEC66850PENTAIR VALVES & CONTROLS US LP DIV PENTAIR FLOW CONTROL
NAS1149C1063R80205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
FF-W-9281348FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
LYC502C101699193HONEYWELL INTERNATIONAL INC.


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HOLE DIAMETER0.630 INCHES MINIMUM AND 0.650 INCHES MAXIMUM
OVERALL DIAMETER1.183 INCHES MINIMUM AND 1.208 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5059 MIL SPEC 1ST MATERIAL RESPONSE AND MIL-S-6721 MIL SPEC 2ND MATERIAL RESPONSE AND MIL-S-6721 MIL SPEC 3RD MATERIAL RESPONSE AND MIL-S-6721 MIL SPEC 4TH MATERIAL RESPONSE OVERALL
MATERIALSTEEL CORROSION RESISTING OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OVERALL
NONDEFINITIVE SPEC/STD DATAA TYPE AND 2 GRADE AND B CLASS
PERIPHERAL SHAPE STYLEROUND
THICKNESS0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us