|
|
|
National Stock Number:
5310-00-238-3133
Federal Supply Class:
5310
National Item Identification Number:
002383133
Description:
WASHER,SHOULDERED AND RECESSED
Detail:
A washer, round in shape, having a centrally located hole. One bearing surface is flat, the other surface is in the form of a raised shoulder (boss) having a flat bearing surface. Either or both of the bearing surfaces must be broken by a counterbore, countersink, or similar shaped recess. The thickness of the shoulder (boss) must not exceed 25 percent of the shoulder (boss) diameter. For items having a shoulder (boss) of greater thickness, use BEARING, SLEEVE; BUSHING, SLEEVE; or SPACER, SLEEVE. Excludes INSULATOR, WASHER and thrust type washers.
|
Manufacturer Information:
| 0N009808 | 98230 | NATIONAL SECURITY AGENCY |
|
Techincal Specification:
| HOLE DIAMETER | 0.323 INCHES MINIMUM AND 0.327 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.750 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-637 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.063 INCHES NOMINAL | | MATERIAL | COPPER ALLOY 482 OVERALL | | RECESS DIAMETER | 0.437 INCHES NOMINAL | | SHOULDER HEIGHT | 0.057 INCHES NOMINAL | | SHOULDER DIAMETER | 0.437 INCHES NOMINAL | | SPECIAL FEATURES | HOLE OPPOSITE SHOULDER CHAMFERED 0.062 IN. BY 45 DEG | | STYLE DESIGNATOR | SHOULDERED AND RECESSED | | SURFACE FINISH | 100.0 MICROINCHES BOTTOM | | SURFACE FINISH | 100.0 MICROINCHES COUNTERBORE WALL | | SURFACE FINISH | 100.0 MICROINCHES OUTER | | SURFACE FINISH | 100.0 MICROINCHES INNER | | SURFACE FINISH | 100.0 MICROINCHES SHOULDER FACE | | SURFACE FINISH | 40.0 MICROINCHES TOP | | TEST DATA DOCUMENT | 98230-0N009808 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|