|
|
|
National Stock Number:
5310-00-434-8415
Federal Supply Class:
5310
National Item Identification Number:
004348415
Description:
NUT,PLAIN,SPLINE
Detail:
A NUT HAVING AN EXTERNALLY SPLINED SLEEVE WHICH HOLDS IT IN POSITION WHEN FORCED INTO A HOLE OF SLIGHTLY SMALLER DIAMETER.
|
Manufacturer Information:
| 47-620-527-1 | 80070 | LOCKHEED MARTIN CORPORATION | | 47-620-527-1 | 97499 | BELL TEXTRON INC |
|
Techincal Specification:
| COUNTERSINK ANGLE | 60.0 DEGREES NOMINAL NUT | | FEATURES PROVIDED | FLOATING NUT | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4140 OVERALL | | NOMINAL THREAD SIZE | 4.250 INCHES | | NUT DIAMETER | 4.695 INCHES MINIMUM AND 4.700 INCHES MAXIMUM | | NUT HEIGHT | 0.479 INCHES MINIMUM AND 0.489 INCHES MAXIMUM | | NUT STYLE | SPLINE | | PILOT DIAMETER | 4.230 INCHES MINIMUM AND 4.250 INCHES MAXIMUM | | PILOT LENGTH | 0.385 INCHES MINIMUM AND 0.395 INCHES MAXIMUM | | SPECIAL FEATURES | SPLINE DATA,47 TEETH,0.31416 IN. CIRCULAR PITCH,20 DEG PRESSURE ANGLE | | TEST DATA DOCUMENT | 81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES | UNS | | THREAD PITCH DIAMETERS | +4.1909 TO 4.1959 INCHES | | THREAD QUANTITY PER INCH | 12 |
|
|